Update 15.10.2023

New Top - less support required

New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of 17mm

Size: diameter 100mm height about 170mm

Orientation of the parts see below!

Settings:

0.20mm Standard
support needed
PLA / PETG
(Drill out the holes in the lid with a 3mm / 3.5mm drill no longer necessary with the new lid)

Hardware:

2x M3 x 16mm

Orientation for assembling

Orientation new Lid with auto tree support

I used a support blocker for the holes

support only necessary under the holes

Mini Desktop Trash Can

by RestoreDoctor · original on Printables ↗

Household / Office

♥ 4.2k⬇ 17.0k🖨 164 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗canofficedeskdesktoptrashcanbindeskorganizertrashtrashbin

Print profiles

Can.stlIN STOCKDEFAULT
⏱ 3h 42m · 115 g · 100 × 120 × 100 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid new.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid new M10.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print