Print in Place Bearings with real rolling elements.
! ATTENTION !
- these models are hard to print and fail easily.
- your printer MUST be able to print gaps of 0,1mm width
- clean your printbed
- make sure, great adhesion is possible
- elements might stick to each other, free the parts by moving and cleaning
- the rolling elements of the bigger bearings might heave to be wiggled free with tweezers
Â
! YOU HAVE BEEN WARNED !
my working settings:
eSun PLA+
layer height: 0,08
flowrate: 12mmÂł/s
wall loops: 3
top layers: 4
bottom layers: 4
seam position: aligned
infill: gyroid, 30%
printer: bambulab x1c
Available Sizes:
608 — 8/22/7
609 — 9/24/7
6000 — 10/26/8
6002 — 15/32/9
6004 — 20/42/12
Filename:
Bearing# —  inner-Diameter / outer-Diamter / height
example:
608 —  8/22/7 => 8mm hole, 22mm outer diameter, 7mm height
BEARINGS - Print in place - with real rolling elements
by SHQ · original on Printables ↗
Hobby & Makers / Mechanical Parts
♥ 5.4k⬇ 16.0k🖨 118 prints
Print profiles
608 - 8-22-7.STLIN STOCKDEFAULT
⏱ 9m · 2 g · 22 × 22 × 7 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
6000 - 10-26-8.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
609 - 9-24-7.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
6002 - 15-32-9.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
6004 - 20-42-12.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print