Articulated slugcats from Rain World with variations for the Monk, Survivor and Hunter. Partially inspired by Copper Keep's Friendly Articulated Slug design.
Printing guide
Don't use Arachne perimeter generator - it makes some walls too thin causing them break easily
Use as much cooling as your material can handle, PLA with 100% cooling is preferred
Layer height: 0.15 mm
Perimeters: set external and small perimeters to 20 mm/s or even 15 mm/s and lower support material interface to 50% speed, use 2 or more perimeters
Brim: don't use automatic brim, make one yourself by adding single layer solids in your slicer if you need them, use the provided brim version of the model if you're not sure if you need one
Create supports with the paint-on supports feature: In Prusaslicer open it, set "Highlight overhang by angle" to 31 degrees, check "Smart fill" and "On Overhangs Only" then fill the underside of the head
Organic supports in Prusaslicer have worked the best for me:Â
- First layer expansion: 0 mm
- Top contact Z distance: 0.17 mm
- Top interface layers: 3
- Interface pattern spacing: 0.15 mm
- Maximum branch angle: 60 degrees
- Tip diameter: 0.6 mm
Enable dynamic overhang speed, these are the speeds that have worked well for me:Â
- 0% overlap: 0 mm/s
- 25% overlap: 15 mm/s
- 50% overlap: 10 mm/s
- 75% overlap: 10 mm/s
Infill: 10% - use how much you want
Hide the seam: set the seam to aligned and use the paint-on seam tool to hide the seams inside the ears
Articulated Slugcats
by thisguyprints · original on Printables ↗
Gadgets / Video Games
♥ 131⬇ 1.2k🖨 6 prints
Print profiles
monk.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
survivor.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hunter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
monk_brim.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
survivor_brim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hunter_brim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print