🔥 Cover up that boring lighter with this Big Boi! 🔥

I wanted to create a case with a thicker body and more weight. This one has a really nice hand feel to it!

The fit is very snug so that the lighter will not fall out, and there's a hole in the bottom to help remove the lighter when it's time to change it.

You might be interested in my other Bic Lighter Case designs!

🔥 Pro Tip:

Remove the label on the lighter with a blow dryer or heat gun to make it easier to insert and so that the label won't get shredded while inserting it into the case.

Note: This fits a standard Bic lighter without a plastic, shrink wrap design.

Print Settings:

Layers: 0.1 ~ 0.2mm (I used 0.1 layers on the tri-colored prints and 0.2 layers on the gold/black print in my pictures)
Walls: 3-4
Infill: 5%
Speed: slow it down to make the outer surface clean and reduce ringing on the pattern edges

Need a quick print to test your first layer?

Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!