While my previous vase-mode trophies included two low-poly designs, I find their patterns to be too regular for true low-poly aesthetics, so I made a new one that matches that style more, and a fitting base. I didn't mark it as a remix, because I used a completely different approach to create this polyhedron, and I learned something new on the way.

Trophy and base use only 4g (1.4m) of filament each, so they may be a good use for some last meters of filament (like most vase mode things). Scale as needed.

Printing

Use vase mode. I used a 0.4mm nozzle with 0.6mm extrusion width on my Prusa Mini, with Bronze Prusament. I use 0.2mm layer height and 3 or 4 bottom layers.