This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly.

EDIT: There are 2 versions (see second photo):

high: for the older style caps with ca. 14mm height (PCO 1810)
low: for the newer caps with ca. 11mm height (PCO 1881)

You might also be interested in a bigger, yet still small bottle cap container.

And I also made a wider version for some smoothie bottle caps.

Printing: I used PLA, 0.4mm nozzle, 0.2mm layer height.

Edit: added a rounded version, it's rounded inside and outside.

mini bottle cap container (pill box)

by DrJones · original on Printables ↗

Hobby & Makers / Organizers

♥ 1.2k⬇ 4.0k🖨 74 prints

License: Creative Commons — Attribution ↗containerbottlecappillboxwatertight

Print profiles

mini bottle cap container high cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
mini bottle cap container low cap.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
mini bottle cap container rounded high cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
mini bottle cap container rounded low cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print