I've added a “New Angle” file for people having issues with the overhang in the underside of the bed on the top.

Introducing the FDM (Fixum Dude Motors) print in place dump truck. The wheels rotate right off the build plate. There is a version with a tilting dump bed and a version with a fixed bed if you'd like a sturdier toy (e.g. for a younger child, etc.)

V2 has newer stronger axles.

Find the entire FDM Vehicle Collection here: https://www.printables.com/@fixumdude/collections/696315

• Prints on its side without supports. Samples printed in:
  Hatchbox Yellow PLA on the Prusa MINI+ in .20LH Speed mode, with 4 top/bottom layers, 2 perimeters and 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy) 

• FilaCube Burnt Orange PLA on Bambu X1-C in .24LH with 3 top/bottom layers, 2 perimeters & 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy)