Print with 30%-50% triangular infill and .05 or .10 layer height. The screw holes are designed for Grip Rite #8 x 1-5/8 in Wood Screws. For more strength, adjust the hold to an upright position, with a slight lean to the side that will be facing you when it is on your wall as shown in the picture below.
Rock Climbing / Bouldering Hold - Slopey Pinch
by Cole W · original on Printables ↗
Sports & Outdoor / Indoor Sports
♥ 74⬇ 517🖨 2 prints
License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗boulderingclimbinghomegymclimbingholdrockclimbingrockclimbingwall
Print profiles
slopey pinch 1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print