I needed a few legs for a bathroom cabinet, so I just made something myself!

If it isn't so well visible in the pictures, the leg is slightly angled.
This leg has a height of 160mm, you can of course scale it a bit in Z but note that you also scale the plate to a small extent.
Make sure you use enough perimeter and infill. This is not a foot designed for very heavy loads. The leg is then screwed on with 3 screws. The holes have a diameter of 4.5mm.

I also added a drilling jig to align the leg with the outside edge of your furniture.

Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :)

Make sure to follow me on Twitter! ;-)