This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long.
You need to print 2 copies of the “ExtendedCap” (one white and one red), along with a single “ExtendedCenter” and a single “Button”.
Print details:
- For the ExtendedCap: print the larger flat side down, for the ExtendedCenter: print the large hole down.
- 0.3mm layers.
- 0% infill (there's no room for it anyways).
- I used brims to prevent warping.
- Use a satin sheet if you have it to add a great finish to the box.
My filaments:
- Overture Pro Black PLA
- Overture White PLA+
- Polymaker Red PLA
Extended Pokemon Card Box
by kfernald · original on Printables ↗
Toys & Games / Board Games
♥ 1.1k⬇ 5.8k🖨 30 prints
Print profiles
ExtendedCap.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ExtendedCenter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
button.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print