Here is a modular hair claw clip with 3 different claw. The system is very simply.

Improvement:

With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35 degrees to use less material)
The opening problem is solved thanks to the comment. Now the clip claws are smaller and the pliers open wider
There are two forms of clamp and clip, a straight one (V3) and a slanted one (V3 draft).

Print detail :

Material : PLA
Print layer : 0.16mm
Support : Everywhere
Infil : 15%

Dimension:

Clamp V3 : 40mm/35mm/20mm
Clamp V3 droit : 40mm/35mm/27mm
Clip 1 : 70mm/40mm/22mm
Clip 2 : 60mm/33m/22mm
Clip 3 : 60mm/25mm/22mm

Please give me return to improve it and ad new claw. Thank you.

Modular hair claw clip V3

by Edgar.A · original on Printables ↗

Fashion / Women

♥ 562⬇ 2.5k🖨 12 prints

License: Creative Commons — Attribution — Noncommercial ↗modularhairclaw

Print profiles

Plier.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 2 draft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 1 draft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Plier draft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip 3 draft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print