This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix.
I used eSun PLA+ as filament and it seems to be robust enough for the small clips on the cover. Use a layer height of 0.08mm and 100% infill with 3 shells/walls. I also used tree supports on build plate only, with 2 top interface layers and a top z distance of 0.1mm to support the small tabs.
Aug 5/23 V1: Added a small nub in the middle of the cover to help press the battery down to ensure contact.
NOTE: The 3mf file included is for Orca Slicer or Bambu Studio. It was set up for my Bambu X1C printer. Use at your own risk.
Mitutoyo Caliper Battery Cover Model 500-138
by Merlwynd · original on Printables ↗
Hobby & Makers / Tools
♥ 35⬇ 1.3k🖨 1 prints
Print profiles
Mitutoyo Caliper Battery Cover 500-138 V1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ProjectOrca_Mitutoyo Battery Cover V1 Model 500-138.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print