Simple star hair clip. Stays in hair pretty well. Printed as one piece, including hinge and closing mechanism.

I made these to wear to a concert of a certain blonde singer/songwriter!

Tested with 

• 0.4mm nozzle
• Sunlu PLA+
• 15% infill
• Layer height: 0.08 mm
• First layer height: 0.2mm
• Solid layers, top and bottom: 6
• 5 mm brim

Plated example is 1 star at 200% and 4 stars at 100%. Scalable, but I recommend scaling only the X and Y, keep the Z at 100%.