Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of his Divider Bins.

Here, I remixed his 1x1 Bins for small parts. For larger parts, you can find my medium sized bins here.

The goal of this remix was to maximize the internal storage space.

Compared to the Original, I shrunk the label tab as it was too large for my needs. The new bins support labels with a width of up to 9mm (the uploaded photos show 6mm wide labels).

I also deleted the magnet holes at the bottom. For Bins of this size, I found that I never need magnets anyways. This change saves a ton of internal space and makes the Bins easier to print.

I also added two intermediate heights, the original only offered heights of 2, 3 and 6 units.

Print settings that I use:

Support: No
Layer height: 0.25mm
Perimeters: 2
Solid Layers: 4 Top and Bottom
Infill: 15%

Update January 7th, 2024:
Added link to medium sized bins. Minor adjustments to 3D models.

Gridfinity Bins for small parts

by Plastic Flow · original on Printables ↗

Hobby & Makers / Organizers

♥ 629⬇ 3.9k🖨 52 prints

License: Creative Commons — Attribution ↗boxorganizercontainerbinsmallpartsbinsgridfinity

Print profiles

GF_Bin_1x1_5u_label_nomag_01.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GF_Bin_1x1_2u_label_nomag_01.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GF_Bin_1x1_4u_label_nomag_01.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GF_Bin_1x1_6u_label_nomag_01.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GF_Bin_1x1_3u_label_nomag_01.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print