Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Black until layer #6 at 0.56mm
Red until layer #19 at 1.6mm
Pure Yellow until layer #23 at 1.92mm
White for the rest.
Lion - HueForge
by Kevyn3D · original on Printables ↗
Art & Design / Other Art & Designs
♥ 298⬇ 1.4k🖨 30 prints
Print profiles
lion_Front_150x225.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print