The size is 133x200.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Black until layer #5 at 0.48mms
Purple until layer #9 at 0.8mms
Green until layer #15 at 1.28mms
White until layer #26 at 2.16mms (edited on 07/15/23, mistake in desciption)
Hueforge - Joker
by Printitou3D · original on Printables ↗
Art & Design / 2D Plates & Logos
♥ 352⬇ 1.2k🖨 33 prints
Print profiles
Joker_Front_133x200.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print