It's a case for SD cards, looking like an SD card. It fits up to 12 SD cards and 12 microSD cards. There is not much more to say.

Materials you'll need

4 Pcs. 8x3mm Neodymium Magnet
Adhesive (e.g. Epoxy)

No MMU required?

If you want to use my gcode file (MK3/S/S+ Prusament PETG @ 250°C), you have to start the print with black filament. The printer will pause and ask you to change the filament. Insert the next filament and resume printing. You have to perform a total of 7 manual filament changes in the order below:

1. Filament Change: Gold
2. Filament Change: White
3. Filament Change: Black
4. Filament Change: Gold
5. Filament Change: Black
6. Filament Change: White
Last Filament Change: Black

Nope, magnets won't ruin your SD cards

"Most modern storage devices like SD cards, thumb drives and SSDs are essentially immune to magnetic fields. In fact, there's nothing magnetic in flash memory, so for all intents and purposes, a magnet won't affect it at all." - Source

SD Card SD Card Case (no MMU required)

by Maaarsl · original on Printables ↗

Hobby & Makers / Organizers

♥ 198⬇ 1.3k🖨 16 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗sdsdcardmicrosdsdcardholdersdcardcasemicrosdcardcasemicrosdcardsdcardorganizersdcardstorage

Print profiles

SD_Card_Case_Lid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SD_Card_Case_Lid_Pins.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SD_Card_Case_Body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SD_Card_Case_Lid_Logo.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SD_Card_Case.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print