Owl generated on Midjourney and STL generated with HueForge. No MMU or AMS required. Small enough to print on the Prusa Mini, but I included the HueForge project if you'd like to mix things up a bit.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
Black until layer #5 at 0.48mm
Dark Gray until layer #10 at 0.88mm
Light Gray until layer #19 at 1.6mm
White for the rest.

HueForge Owl

by Nate · original on Printables ↗

Art & Design / 2D Plates & Logos

♥ 275⬇ 1.2k🖨 11 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗mmumulticolorowlamshueforge

Print profiles

owl_Front_150x150.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
owl_Front_150x150.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print