Jacobs Ladder Toy (Print-in-Place Model)

Commercial license for all my models -→ https://www.patreon.com/MeasureOnce

New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666

DO NOT SCALE. There is 0.4mm clearance around the joints. If you scale it any smaller then the joints can fuse together. If you print it larger then the joints will be loose and it will fall apart.

A print-in-place model for the centuries old toy “Jacobs Ladder.” Does not require any supports and will work right off of the printer! Please make sure your settings are calibrated to handle elephants foot (use a negative initial layer offset) as well as bridging. Do not use a brim. The joints have a gap of 0.015" so make sure your printer can handle that. If it does not work well then you might need to compensate for any over extrusion.

*****Part will need to be reoriented on built plate with the flat side touching the build plate***

Jacobs Ladder Toy (Print-in-Place Model)

by MeasureOnce · original on Printables ↗

Toys & Games / Puzzles & Brain-teasers

♥ 578⬇ 5.2k🖨 31 prints

License: Creative Commons — Attribution — Noncommercial ↗toytoysfidgetarticulatedflexibleflexiprintinplacefidgeting

Print profiles

jacobs_ladder_for_smaller_bed_th.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
jacobs_ladder_fixed_larger.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print