This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load.

here are the changes that i made:

made it 0.18mm longer(35.62mm to 35.8mm)
moved the C side pin 0.4mm outwards, for better alignment
longer pins(7mm from 2mm)
smaller corner radius(0.5mm from 0.75mm)
moved, shrunk C connector hole, for thicker, stronger part

Update: The v2 design is just to add better compatibility with different printers. I modified the pins to have different size, depending on your printer's accuracy, you can choose between 5 different size: the original and +/- 0.1mm or 0.2mm.

i also included the step file as konseben did, so further refinement can be done if needed.

ROG ALLY dock cover v2

by CippyO · original on Printables ↗

Gadgets / Portable Devices

♥ 209⬇ 2.6k🖨 12 prints

License: Creative Commons — Attribution — Noncommercial ↗rogasusallyxgmobile

Print profiles

XG mobile cover.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
XG mobile cover-0.1mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
XG mobile cover+0.2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
XG mobile cover-0.2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
XG mobile cover+0.1mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print