I needed af holder for my M18 batteries in my van, and I wanted it to be easy to print. There
is no click lock on the model, the battery is supposed to be held in place by friction
mine is printet in ASA but works well vith PLA,PETG,ABS
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 42%
Perimeters: 4
Solid layers top/Bottom : 4
Milwaukee M18 Battery Holder X3
by Mike Foged · original on Printables ↗
Hobby & Makers / Tools
♥ 157⬇ 2.0k🖨 9 prints
License: Creative Commons — Attribution — Noncommercial ↗organizerbatterybatteryholdermilwaukeem18milwaukeem18
Print profiles
M18_holder_X_3_ v1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print