Original model was good, except for the hinge, it's a perfect candidate for printing in place.
That's my first print in place model, so any hints, makes, comments are very appreciated!
Print settings
PLA
0.2 height
3 perimeters
30% infill (basically only on the hinge)
V1: looser fit for anyone that has to look for bigger tolerances, can't be separated
V2: tighter fit, perfect if you have fairly well tuned printer
@update: I've uploaded both versions with drying holes
Toothbrush Travel Case print in place
by codewarriorr · original on Printables ↗
Household / Bathroom
♥ 6.4k⬇ 24.0k🖨 348 prints
Print profiles
toothbrush_travel_case_v1.stlIN STOCKDEFAULT
⏱ 18m · 7 g · 42 × 59 × 18 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
toothbrush_travel_case_v2_tighter_fit.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
toothbrush_travel_case_v1_holes.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
toothbrush_travel_case_v2_tighter_fit_holes.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print