I split this into 3 parts:

The clamp itself, a nut and a bolt.

I recommend printing the nut and bolt at lower layer heights for cleaner overhangs and a better fit. I used 0,12mm. I also scaled down the bolt to 99% in x and y In the slicer. Do not change z scale, as this affects the pitch and wouldn’t fit into the nut anymore.

The clamp is designed to be printed on its side, the cable canal facing downwards. no supports are needed, holes are teardrop shaped, which works pretty good. I used PETG, 3 perimeters and 15% cubic infill.

I designed the hole for the apple charger with a clearance of 0,2mm in diameter. If you need changes to this, im happy to do so. For

Maximum table thickness is ~44mm. I can provide a longer bolt in the future for really thin tables.

I'm happy to implement changes, if you have any requests.

EDIT 29.06.2023:

-added Bolt versions _45mm and _55mm, which make the original clamp work with thinner tables (min. 0mm for the 55mm version)

-added clamp version for thinner tables (clamp opening 30mm vs. original 45mm)

Apple Watch Clamp

by Leo · original on Printables ↗

Gadgets / Other Gadgets

♥ 176⬇ 664🖨 7 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗appleclampapplewatchapplewatchstand

Print profiles

apple_watch_clamp_nut.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
apple_watch_clamp.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
apple_watch_clamp_bolt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
apple_watch_clamp_bolt_45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
apple_watch_clamp_bolt_55mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
apple_watch_clamp_thinner_table.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print