4 Color HueForge model. Han Solo Carbonite filament painting made using Sunlu PLA+ colours.
Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear)
Filaments Used:
Sunlu PLA+ Black Transmission Distance: 0.6
Sunlu PLA+ Grey Transmission Distance: 2
Sunlu PLA+ Silver Transmission Distance: 2
Sunlu PLA+ White Transmission Distance: 6
Swap Instructions:
Black until layer #6 at 0.56mms
Grey until layer #9 at 0.8mms
Silver until layer #11 at 0.96mms
White for the rest
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.
Use the exact numbers in your slicer to match up properly.
two different size models are supplied and designed to print with 0.4 nozzle, do not resize the images in the slicer
Han Solo Carbonite (Filament Painting)
by Ian Smalley · original on Printables ↗
Art & Design / 2D Plates & Logos
♥ 682⬇ 2.2k🖨 29 prints
Print profiles
han solo carbonite_Front_60x150.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
han solo carbonite_Front_80x200.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print