My wife bought ceramic ornaments like these for our daughters to paint. Unfortunately, they didn't grip the rim of the pot very well and were very fragile. I decided to see if I could make something better.

Be gentle, this is my first attempt at modeling something like this.

I printed this with 0.2mm layers, 10% infill and buildplate-touching supports set to 73 degrees. Go slow (15mm/s) on the walls and use max cooling after the first layer due to the steep initial overhangs. I used Overture PLA+.

Climbing Bunny Flower Pot Hugger

by Rabid Badger · original on Printables ↗

Art & Design / Sculptures

♥ 1.3k⬇ 4.3k🖨 72 prints

License: Creative Commons — Attribution ↗vaseplantrabbitplantercuteeasterbunnyeasterrabbiteastereastereggbasketrabbitearseasterdesigneasterbasketrabbitseasterdecorationeastereggseasterdecorationsbunnyearsbunnyrabbiteasterdecorbunnystatuebunnydecor

Print profiles

bunny.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bunny_half_lop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bunny_lop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print