An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets, rings, etc. This has quickly become my wife's favorite model, and I hope you can enjoy as well. 😊
The one shown in the pictures was printed on my Prusa Mini and is using the three shortest stand lengths, but I've also uploaded an additional size larger for those that may prefer it and have a larger printer. No supports are required (the stands should be printed on their backs), and I'd recommend setting the “Vertical Shells → Perimeters” setting to 3 or higher in the slicer - just to give things a bit more strength. In addition to the STLs, I'm also attaching a 3MF file that includes all of the parts as well as the ‘gcode’ I used for my print.
The stands are designed to simply snap into the base and have just a small amount of tolerance built into them, so they should hold tightly without requiring any glue. Depending on how your filament behaves, you may need to use a couple of taps from a hammer to get them seated the first time. Here is a zoomed-in section analysis picture of how the snap joints are modeled so that you have an idea:
Jewelry Organizer Stand
by squinn · original on Printables ↗
Fashion / Other Fashion Accessories
♥ 506⬇ 1.9k🖨 26 prints
Print profiles
Stand - 170 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stand - 205 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stand - 135 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stand - 100 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jewelry Organizer Stand.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print