This is Version l of the ring holder, designed for the Prusa Ring Holder Contest. It features textured sides and can hold any size ring up to 5mm wide. 

Please leave a like and follow to increase the reach of the project!

The ring pictured is size 6.5US and 3mm wide.

________________________

Print Suggestions!

• Use a layer height of 0.2mm or finer
• Use a 0.4mm or smaller nozzle due to thin walls
• Allow bed to cool completely before removal due to thin features
• No supports needed, prints in one piece
• If having bed adhesion problems, clean with alcohol or use glue stick

________________________

Let me know if you have trouble printing the textured sides and I will post one without it.

Please reach out if you are encountering any difficulty printing, I'm happy to help!