Need guy rings for your portable antenna mast? Look no further.

But why 5 holes? 5 hole guy rings offer easy attachment for 3, 4, or 5 guy lines, making them more universal and easier to use in a variety of setups.

Rings are sized by the inner diameter (ID) which is stepped up in 1/8 inch increments from 0.5 to 2 inches. Each ID has 0.05 inch additional clearance for fit on the pole (0.5 inch ring is actually 0.55 inch ID, and 2 inch ring actually has 2.05 inch ID). Guy line hole tie points are 0.25 inch diameter.

Concerned about strength? The 1 inch ID ring printed in PETG is able to withstand 150 lbs of load across two of the holes without breaking.

For best performance, print in higher strength and higher temp plastics like PETG, ABS, or Nylon. Use 100% infill. Concentric infill will likely provide best strength.

Get that antenna up, and get on the air!

73 DE K6ARK

Mast Guy Rings

by Adam Kimmerly · original on Printables ↗

Gadgets / Other Gadgets

♥ 94⬇ 555🖨 1 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗towerantennaradiohampoleamateuramateurradiolinemastguy

Print profiles

GuyRing_0.625.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.25.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_0.5.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_0.75.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_0.875.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.375.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.875.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.625.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.75.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.125.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GuyRing_1.5.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print