UPDATED!!! see the update log below (Thank you ydkjman S!)
Another (re)mix of CaseStudyno8s (https://www.thingiverse.com/thing:1598042) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own Kylo Ren's collapsing lightsaber. So I remodeled the whole thing to fit the collapsible blade. Multiple parts were put together so it is less about gluing and more about layer color changes within the print. The Blade is also remodeled. It has a steeper angle, so it is not so thin at the end which also helped the blade to be longer and broader. Plus the tip curve fits better.
The big help should be the attached 3mf files, those will show you how I meant everything.
Everything should snap or go together pretty simply or snugly enough. Most of the parts need to be glued together - the design is so complex because of the way it is printed mostly supportless, that there is no other way than a superglue.
For the crystal chamber - insert and glue the internals first, then slide the inner silver part over it. Use filament to imitate wiring - 2x30mm of blue filament, 1x approx. 200mm of red filament (both filament diameters 1.75mm). Feel free to play with colors, shaping of wires, etc.
Pommel_knobs are slightly round on one side and you need just 5 of them (because of the belt_clamp).
Belt_clamp is a kind of glue-on scenario, but it will make disassembly of the hilt impossible. I have to find another solution soon in the upcoming update.
Try to follow the way the parts of the lightsaber line up.
I will print it soon to find any tolerance issues (mainly blade, pommel thread), and so on and I will keep the whole thing updated. I am also planning to make the Pommel_electronics part more complex later on - now it is more about trying if everything works well together. DON'T GLUE THE POMMEL_LID ON if you want to exchange the Pommel_electronics in the future.
Download, print, and enjoy! :)
UPDATE V1.1
- Pommel_main and Pommel_lid - 3mf file updated
- Pommel_electronics now fits right - 3mf file updated
- Belt_clamp part split into 2 parts, so it can be glued on and the whole lightsaber still disassembled - 3mf file updated
UPDATE V1.2
- Emitter_main has now higher tolerance for all inner inserted parts, so it can slide better together
UPDATE SIDE BLADE
- Side blade with a steeper angle added - split the .stl file into objects as you will need those separately
3D printing settings
Many parts are supportless designs, but some parts require support or even a brim (long tall parts). Follow the 3mf files.
The hilt (PLA):
layer height: 0.125
infill: 10%-20% (20% for small parts)
perimeters: 2
supports: if needed
brim: if needed
ironing: on
The blade (transparent PETG):
layer height: 0.3
extrusion width: 0.6
vase mode: on
supports: off
brim: on, 5mm
Kylo Ren Collapsing Lightsaber
by brinkbeat · original on Printables ↗
Costumes & Accessories / Props
♥ 133⬇ 795🖨 6 prints
Print profiles
Blade_main_3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_side_3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_side_4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_side_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Knob1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_main_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_main_5.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hilt_knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_main_4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_side_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crystal_chamber_part_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pommel_decor.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade_main_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wire_clamp.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crystal_chamber_part_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Switch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Emitter_side_handguard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Belt_clamp.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Knob2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Emitter_side_sleeve.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pommel_knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crystal_chamber.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hilt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber_PLA_dark-grey.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber_PLA_red.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber_PLA-silk_black-yellow-orange-purple-blue-silver.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber-belt_clamp_PLA_black-gold.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pommel_main_V1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pommel_electronics.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Belt_clamp_split_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Belt_clamp_split_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pommel_lid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber_PLA_silver.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber-belt_clamp_split_PLA_black-gold.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kylo_Ren_Lightsaber_PLA_black.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Emitter_main.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
side_blade_steeper_angle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print