The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws.
This screens screw pattern is too wide to accommodate the default skirts. The screen housings screw holes have bulges, that interfere with the stock skirts.
Modified skirt files are included in this listing.
The matching side skirts, fan grills and Z motor covers can be found in a separate listing. Just type my username into the search bar and you'll find it pretty quick.
The skirts can be printed with an accent color for the honeycomb infill pattern, by switching filament colors at the layer just above the honeycomb mesh. The housing accent pieces can be printed in different colors, and are secured to the housing with a few drops of superglue.
I was able to print one of these housings with decent results using no supports whatsoever, but if you use PrusaSlicers organic supports and a good amount of cooling, it comes out much better.
Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0
by Ken226 · original on Printables ↗
3D Printers / Voron Parts & Upgrades
♥ 318⬇ 1.9k🖨 13 prints
Print profiles
Accent Filler Set.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Accents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
250 Front Skirts.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
350 Front Skirts.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
300 Front Skirts.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
350 RightPlainSkirt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
350 LeftPlainSkirt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pi TFT50 V2.0 Housing.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print