I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files. Printed from PLA with brim, rotated 90 degrees around the X axis. The wedge can be temporarily attached (by double sided tape) under the base to maintain the secondary angle.
Included FreeCAD source file. You can enter the drill bit diameter in Spreadsheet for example “=13.5 mm” or "=0.375 in" and export the part to stl file.
Drill bit sharpener
by peterholly · original on Printables ↗
Hobby & Makers / Tools
♥ 202⬇ 1.3k🖨 6 prints
Print profiles
DrillSharpenerV3_A118deg_D08.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D10mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D10.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D11mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D12.5mm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D08mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D12mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D13mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV3_A118deg_D09mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerV4_A118deg_D12mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerWedge_22deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
DrillSharpenerWedge_20deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print