🖨️ Print Shop
Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic

Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace.

Thanks to its magnetic attachment, the Purge Poop Slide is easy to attach and remove, while also allowing it to move effortlessly with your printer. This is especially beneficial if your printer has anti-vibration feet and tends to oscillate during printing, as the slide stays in place and moves with the printer, ensuring stability and reducing any potential rattling noises.

Print Time:
  • ±2h10m
BOM:
  • 15x Magnets (glue them in place)
    • I have included two designs depending on the magnets you have.
      • 8 to 10mm W x 1.8mm D
      • 6 to 8mm W x 3mm D

Note: When selecting the bucket make sure there's enough space because my machine sits higher due to the squash ball feet. If your machine uses the standard feet and only has about ±30mm of space, use the bucket I've included that has a special cut-out for this

Print instructions:
  • .24 layer
  • 3+ perimeters
  • Arachne Wall Generator
  • ±30% infill
  • Lightning Infill Pattern
  • No Support
  • PLA / PETG

Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic

by erickson85 · original on Printables ↗

3D Printers / Bambu Lab Parts & Upgrades

♥ 194⬇ 1.6k🖨 19 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗pooppurgebambulabbambulabpoopbasketx1c

Print profiles

  • X1C-Slide ( 8 - 10mm x 1.8mm Magnets).stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Bucket 55mm.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • X1C-Slide (6 - 8 mm x 3mm Magnets).stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Bucket 50mm with cut-out.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print