Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press.

One other, fast and easy solution is to use this little tool, that can be inserted between strands before serving the peep,  without the need for a press.

Then, you just have to slide the tool up or down to rotate the peep and have a perfect alignment.

Optionnaly, the tool has an outside groove if you want to tie it with serving string.

This model can be printed with standard PLA, 0.2 layer height.

NB : The more twists your bow string have, the more angle peep can rotate with this tool. If bow string is not twisted, the tool has no effect. Depending on the quality of your printer settings, some final finition with a small round file is recommanded to remove any little default that can damage your bow strings

If you find this model usefull, please give a like to support  my work :)