use ❗PETG❗ or some flexible material (do not use PLA)
Info:
- carabiner modification of my previous model
- this variation is more stiff (harder to open, harder to insert key ring through the gap)
Dimensions:
- its height is 7,5 cm (bigger by 10% than v1 model)
- adjust scale if you want other size
Print info:
- use ❗❗❗❗PETG❗❗❗❗ for flexibility
- use brim for textured plate
- i used 10 perimeteres - so whole body is made from perimeters only for more strength
- 0.2mm layers
- see 3mf
V2 Partitioned Carabiner + lock hook (more stiff)
by sh · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 112⬇ 622🖨 14 prints
License: Creative Commons — Attribution — Noncommercial ↗loopkeyringonepiecepartitioncarabinerkeyringholderlockingkeycarabinercarabinelockingcarabinerstrongcarabinersnapcarabinercarabinewithpartition
Print profiles
carabin_lockhook_with_partitionV2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
carabin_lockhook_with_partitionV2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print