Update
I redesigned this model. You can find the new version here:
https://www.printables.com/model/859158-clicking-ratchet-fidget-ring-20-print-in-place
A simple fidget ring featuring a ratchet mechanism to make it click! Have fun!
This model was inspired by the Print-in-place fidget ring created by @Makkuro but is an original creation by me.
The ring initially may require some force to break loose (make sure you are twisting in the correct direction!) and depending on the printer and settings may require some lubrication like WD-40 or similar.
The inner diameter of the ring is 18 mm but it should not be too hard to adapt the supplied CAD files to other diameters.
The model in the picture was tested with Prusament PLA Galaxy Silver.
Ratchet Fidget Ring Print-in-place (Clicking!)
by flup52 · original on Printables ↗
Fashion / Other Fashion Accessories
♥ 50⬇ 817🖨 9 prints
Print profiles
fidget_ring_ratchet_v3.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print