I included the exported files, stl, and printed images.

I printed this with 10% infill and 2 walls.
.20mm layer height.

It uses 380.33 grams of filament with .28mm layer height at 10% infill and takes roughly 8h50mins to print on standard mode.
I ran mine in ludacris mode and it printed in just under 4 hours.

Bambu Slicer let me export the sliced 3mf file but not the gcode.

I made a requested remix of this model.
https://www.printables.com/model/591779-bambu-poop-chute-modified/files

Bambu Poop Chute

by Fantasy3DPrintsShop · original on Printables ↗

3D Printers / Accessories

♥ 648⬇ 10.7k🖨 70 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗bambulabx1carbon

Print profiles

PoopChute_Final.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PoopChute_FinalV1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PoopChute_FinalSliced.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print