Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm diameter.

Original model based off of the @juicebox design for the Skadis system, but fit for HSW. Also made a few changes in design for easier printing without supports and flattened the bottom so the sticks wouldn't wobble.

Printing Notes:

Layer height: 0.2mm
Filament: PLA
Infill: 15%
No supports

This is part of my version of the Honeycomb Storage Wall by RostaP. If you want to see my other HSW designs go here: https://www.printables.com/@FixThisBuildThat/collections/580572

For the full video of my HSW wall check it out on the Fix This Build That YouTube channel: https://youtu.be/NsBqs3TRjqQ

Double Glue Stick Holder - HSW

by Brad @ FTBT 3D · original on Printables ↗

Hobby & Makers / Organizers

♥ 423⬇ 2.3k🖨 50 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗storagegluehoneycombgluestickhoneycombstoragewallhsw

Print profiles

HSW Two Glue Stick Holder.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print