This is a bottomless hide for reptiles, like a snake.

Made from an original photogrammetry rock model created by KlessGyzen.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No

Resolution:

.28mm

Infill:

25%

Filament: Priline PLA Grey

Notes:

I recommend printing without supports if your printer can at least print without making spaghetti. The inside will be ugly, but hit it with a propane torch or heat gun to smooth it out. The critter won't care!

How I Designed This ===================

Made with 3D builder, hollowed out original model, then added entrance.

Category: Pets