These modules are based on Gridfinity by Zack Freedman. They are great for sorting small hardware like screws, bolts, nuts, etc., or your EDC. Each module in this project is 3U tall and fits perfectly on 2x4 Gridfinity frames.
I printed the modules in Jessie PLA at a .25mm layer height and 15% infill with a .4mm nozzle.
The modules included in this project are:
- 1x1, 1x2, 1x4,2x2
All modules are 3U tall. The depths of the bowls vary by size based on my testing. YMMV.
Additional accessories:
- *Rubber bumper pads for feet of baseplates
- These bumper pads are perfect for the feet of the baseplates. They have enough grip that I didn't need to add magnets or weights to my baseplates to keep the bases in place during everyday use.
Affiliate Link Disclaimer
*This link contains an affiliate link for me. This costs you nothing and helps support me.
Gridfinity Bowls
by ethanthompson · original on Printables ↗
Hobby & Makers / Organizers
♥ 1.5k⬇ 5.9k🖨 61 prints
Print profiles
1x1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print