This is a replacement headband for the Razer Kraken X with functional adjustability!

I recommend printing with PETG because PLA is too stiff, but you do you.

To get the side pieces off the original headband, you need to use a thin metal spudger and pry them open carefully, they are glued to the headband. Be careful not to break the original side pieces as they are required! 

If you break the original side pieces, you need to design new ones yourself, sorry. I can't do it for you as the headset wasn't mine and I don't have the original pieces for measuring anymore.

If you want to change the engraving text, you can use the Fusion 360 file in the downloads section. When you export it for your Slicer, make sure to remove supports from the engraving, they aren't needed.

The adjusting mechanism is a bit stiffer than the original, if you want to improve it, feel free!