I made a dummy grenade that has an articulated spoon using a stock BIC pen spring.

Great during for example airsoft and training purposes to give you that extra split second to enter a room.

There are 2 types of body's for the grenade, type 1 is just a solid one, type 2 has a slightly smaller main body which has room for a template.

Included is also a template which you can use to put your or your teams name on there for identification purposes.

And for those curious, my label reads "Model 1.33.7 - Distraction Device".

---

Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you: https://www.etsy.com/shop/XDr4g0nX3DPrinting

Print Settings

Printer:

Gemstock - Azurite

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.15mm layer height

Infill:

30%-50%

Notes:

Print the spoon sideways with support otherwise is will very quickly break.

Post-Printing =============

Assembly

When cleaning the parts, remove all supports from the spoon and use 2x M3 screws and a BIC pen spring.
I found that using glue to attach the spring on the fuse is best to keep everything together.

I made the pin out of a steel pin bent around a keyring.

Category: Sport & Outdoors