Features

• Bigger, Better & Easier to print
• Each part can be printed individually
• The long bridge can be printed using support
• This is an updated version of my previous Dice Tower

Be advised this model may be hard to print

• Your printer must be well calibrated because it's a very tight fit
• You may see this model as a torture test for your printer and your skills
  • Choose a filament that is easy to print with a very fine tune profile
  • Try with the tolerance test print first 

Print Instructions

• Use Default 0.20mm QUALITY Prusa Slicer Print Settings
• For better quality, print the parts individually
• Filament : PLA (and maybe PETG)
• Perimeters : 2~3
• Dice Box Tower
  • Supports : For support enforcers only
  • Use Paint-on supports for the bridge
    • XY separation : 80~100%
    • Style : Snug
• Dice Box Cover
  • Brim : Absolutely Yes

Change Log

• 2023-04-01
  • It's done, I’m open to suggestions ;-)
• 2023-03-31
  • The Hex Dice Box Tower now has reinforced top side panels
    • So it can be printed with only 2 perimeters
  • The Dice Box Cover now has feet
    • Improve the overall stability of the box when opened
• 2023-03-30
  • The Hex Dice Box Tower now has thicker walls
    • It is almost easy to print ;-)
• 2023-03-29
  • Added another Dice Box Tower with a HEX Pattern
    • Looks pretty nice, but it is really hard to print :-/
• 2023-03-27
  • Replaced the Dice Box Screws by Push Pins
  • Added a Tolerance Test for the Dice Box Push Pins