Recommend printing in ASA for heat and UV protection.
Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both an adhesive as well as a sealant. I'm sure super glue and silicone would work too.
Designed for use with 1/8" o-ring material. https://a.co/d/9pIeBk6
I used the putty knife that came with one of my printers to pry the back of the dish off. Inserting the blade in between the grey top and white back at the seam and slowly work the blade around the perimeter.
I had the back panel laser cut out of acrylic from send cut send. DXF included in files.
Step files included for easier remixing.
Starlink Rectangular Dishy Flat Mount Bezel
by chadfawcett · original on Printables ↗
Hobby & Makers / Other Ideas
♥ 70⬇ 1.3k🖨 0 prints
Print profiles
Bezel Corner A.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bezel Corner B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Back Panel Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mounting Bezel with Cable Routing Nub.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mounting Bezel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bezel Straight.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mounting Bezel with Cable Routing.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print