On Thingiverse I found a really good grip for the Nintendo New 3DS XL. So the handling while playing is much better for bigger hands!

You can put the original model in the shelf standing, BUT it was unstable and crashes almost on the front. So I sculpted & balanced the bottom, cut it for printing upright and reduced the size a bit for a perfect fit…

Now you have a handsome grip AND a perfect stand. So, slide your New 3DS XL in and you're done. You can play or put it in the shelf - laying or (safely) standing. Have fun! ^-^

Here are my print settings:

• PLA (58g with support)
• 0.2 mm
• 10% infill
• tree support (5% PLA of the model) under the bridge
• print time: 1h 32m

___________________________________

I used the model of Zachary3D (thanks!), wich was a remix of the original grip from Luckystrykx. Thanks so much!