Remix of very nice model by Idlebear. After struggling with getting bolts (long) to fit the original model, I remixed it to make it possible to assemble with only 3x M3x25 bolts. The axles were changed to be a part of the print. The gears have not been changed, only the differential carrier.

To make this, the following is necessary:

Print the two halves of the carrier
Print 3x right planet gears
Print 3x left planet gears
Print left and right drive gear
Print main drive gear
Print frame and spacer
Print handle and nut

Can be printed without supports.

Depending on the slicer/printer, the left/right drive gear may need supports (I did not use supports).

The base of this model is rather simple and not so good. I've made a remix that fixes that here: Base for Torsen Differential.

Torsen Differential Type 2 model

by floano · original on Printables ↗

Learning / Engineering

♥ 93⬇ 538🖨 4 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗gearsmodeleducationaldifferentialplanetarygearstorsenhelicalgears

Print profiles

DriveNut.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CarrierBody2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Left_Drive_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Right_Drive_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CarrierBody.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MiddleSpacer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Right_Planet_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MainDriveGear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Left_Planet_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print