I had issues printing the frame of Mini 13 with no supports, so I remixed it with some simple supports built in. Inspired by this for Lucky 13 by basti30:
https://www.printables.com/model/154760-lucky13-easy-print-without-brim
Printed with PLA and suggested settings from original Mini 13 frame.
- Layer height 0.15mm (first layer 0.2mm)
- 3 perimeters
- 30% rectilinear infill
- Slow down the first layer print speed (30% of default)
- 0.25mm elephant foot compensation
- Print external perimeters first
- No brim or support material
MINI 13 Printable Jointed Figure Frame - Presupported
by Peter · original on Printables ↗
Toys & Games / Action Figures & Statues
♥ 353⬇ 2.3k🖨 10 prints
License: Creative Commons — Attribution — Noncommercial — Share Alike ↗toyactionfigurefiguresnosupportsneededmini13
Print profiles
mini13-all-frame-supports.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print