Print Guide:

Before printing, ensure your printer is properly calibrated.
 

Print Time: roughly 4 to 5 hours. (May vary depending on your printer).

Filament: PLA/PLA+ (My prints were done with xypolyer PLA+ Black 1.75mm)
Infill: At least 50% (anything lower is more prone to break).
Infill Pattern: Gyroid (recommended for strength in all directions).

If printing multiple, be sure to test the strength and fit of your first print before printing more.

Strength Test:

Mount the holder onto a surface, attach a tool to the holder and apply pressure vertically and horizontally while listening and feeling snapping/cracking.

Adjust Infill per cent accordingly.

Please be sure to post your makes to share with others!