Tried to find a 10 inch rack mount Mini-ITX computer case for my PFsense build. But coudn't find one on the market in the EU or here on thingiverse. So I designed my own.
Features:
- 2U 10 inch rack mountable
- Fits a Mini-ITX motherboard
- 1 low profile expansion card
- 1 2.5 inch SSD or hard disk mount
- 2 mounts for 60mm fan (although if you are using an expansion card you can realistically only fit 1)
- on/off switch
- hole for 12v PSU socket (I'm using a PicoPSU)
- hole for external cable (I'm using this to power the two 140mm fans in my cupboard)
- top vents
Both the left and right side panels have two versions. One with vents that fit a 60mm fan and one without. In the pictures I'm using the left with vents and a noctua 60x25 fan and the right without vents. The case keeps my celeron J3355 at 35 degree Celcius idle.
Whole case is screwed together with 4 m3x30, 4 m3x20 and 8 m3x15 hex socket cap screws and 16 m3 nuts.
The two other things in the rack are:
- a 12 port keystone plate (don't know what brand)
- netgear GS108Ev3 (I hung this with the mount for the TP-Link SG108 (same chassis) from the "10 inch rack project" by mariusbach https://www.thingiverse.com/thing:3337383)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: generic PLA PLA Black
Notes:
The only piece that needs supports is the top for the sunken screwholes.
You need at least a 220 x 220 build plate Category: Computer2u 10 inch rack Mini-itx case for PFsense or OPNsense
by rebelangel · original on Printables ↗
Gadgets / Computers
♥ 102⬇ 511🖨 3 prints
Print profiles
right_panel.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
right_rack_ear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
reinforcement.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back_panel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
left_panel_vents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
front_panel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
mobo_tray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
left_panel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
right_panel_vents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
left_rack_ear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print