I am glad so many of you are enjoying this design. No, this design is not available to license or to sell.

I redesigned my original Spice Rack Pullout

I designed this pullout spice rack to allow for one, two, or three pull out shelves for spices. The rack pulls out and rotates 90 degrees in either direction just like the original design. There are two shelves on the rack which allow for the short spice containers on the top and larger round or square bottles on the bottom.

You will need to print one, two, or three of all the four parts that don't end in XN.stl based on whether you are building a single, double, or triple spice rack. You will need to print one of trackXN.stl and endtrackendXN parts, where ‘N’ is 1, 2, or 3 based on the number of spice racks you wish to print.

You can modify the lengths of the stainless steel rods for your needs, but I used:

6 x 3mm x 136mm for the bottom shelf
6 x 3mm x 63mm for the top shelf

Hardware parts

Small flat head screws to fasten bottom rail and end-cap to cabinet.
2 fender washers
Book binding post (15mm size) or equivalent. If using nut and bolt, you may have to cut the bolt to length to prevent it from rubbing against the track.
3mm stainless steel rods. I purchased these: https://www.amazon.com/gp/product/B085QMML79/

Spice Rack Pullout with Metal Rods

by SpongyBob · original on Printables ↗

Household / Kitchen

♥ 1.6k⬇ 3.2k🖨 24 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗kitchenshelforganizerspicespicerackspicesspiceholderspiceorganizerspicejar

Print profiles

spice-cab-rod-trackendX2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-trackendX3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-rail.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-trackX2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-trackendX1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-trackX1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-trackX3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-bot.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
spice-cab-rod-mid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print