I made this screen holder for my Voron 2.4 350, I printed another screen holder on here, but it really wasn't the quality that i was looking for with my Voron. It looked cool but I couldn't bring myself to use it due to screw alignment's or lack there of. This is Just a simple holder for the screen I made in Fusion360, if someone wanted to make it look cool with all the hexagons covering the gap between the screen and the underside of the printer I did make it with the spots for 4 heat set inserts so it could be attached to the mount. I uploaded the STEP and F3d files too if anyone wants to mod it for whatever reason.

This mount is a 45 degree mount for the Voron 2.4 and probably the Trident, fits the BTT HDMI5 screen.

BOM is 6 M3x12 screws and 2 T nuts to mount it to the extrusion.

Make sure you get your screen orientation and brightness set before you mount it as it's a pain to change it later, assuming your cables go out the right side, the buttons will be behind the rail. It is also reversible if you want your cables to go out the left side and have access to the buttons.